* Cantinho Satkeys

Refresh History
  • cunha45: Entendido
    16 de Julho de 2025, 20:33
  • j.s.: reafirmo 15/07/2026 o forum encerra
    16 de Julho de 2025, 18:26
  • j.s.: o que foi dito é que este ano está pago, e para bom entendedor foi dito que após desinteresse nos membros, ficam já avisados que a 15/07/2026
    16 de Julho de 2025, 18:25
  • j.s.: boa tarde
    16 de Julho de 2025, 18:22
  • cunha45: Com a colaboração de 6 membros, aos quais agradecemos e com custos muito elevados, por parte da administração, foi pago mais um ano , do domínio e nome do fórum, num servidor externo.  Como o fórum é dos dos seus membros, e como estes mostraram total desinteresse numa pequena ajuda para a sua manutenção informamos que  a partir de 15/07/2026 o fórum encerra as suas portas.  Para todos os membros que não nos quiseram ajudar, e que fazem neste fórum, os seus downloads do que aqui disponibilizamos, para seu proveito e de borla, iremos cancelar essa função, apenas podendo vizualizar o forum.  A administação
    16 de Julho de 2025, 13:43
  • cunha45: ainda nao encerrou
    16 de Julho de 2025, 13:42
  • FELISCUNHA: ghyt74  pessoal   49E09B4F
    16 de Julho de 2025, 11:46
  • m1957: Obrigado pelo cuidado em informar!
    16 de Julho de 2025, 00:45
  • cereal killa: boas gomes, 4tj97u<z
    14 de Julho de 2025, 21:32
  • j.s.: cereal enviei pm  4tj97u<z
    14 de Julho de 2025, 21:13
  • j.s.: Entre as 20h do dia 13 de agosto de 2025 e as 10h do dia 14 de agosto de 2025 (horário CEST).
    14 de Julho de 2025, 20:55
  • j.s.: foi refeita nova data para migração
    14 de Julho de 2025, 20:55
  • j.s.: 43e5r6
    14 de Julho de 2025, 16:49
  • j.s.: por isso o forum deve estar off line  Início: 16/07/2025 às 20:00 (CEST) Fim: 17/07/2025 às 10:00 (CEST)
    14 de Julho de 2025, 16:49
  • j.s.: vai ser efectuada migração de servidores
    14 de Julho de 2025, 16:48
  • j.s.: dgtgtr a todosc 49E09B4F
    14 de Julho de 2025, 16:47
  • cunha45: ja
    14 de Julho de 2025, 08:25
  • j.s.: passem por aqui p.f. [link]
    13 de Julho de 2025, 16:29
  • FELISCUNHA: Votos de um santo domingo para todo o auditório  4tj97u<z
    13 de Julho de 2025, 11:31
  • j.s.: tenham um excelente domingo 49E09B4F
    13 de Julho de 2025, 09:07

Autor Tópico: WinSPS-S7 v6.05 Multilanguage  (Lida 140 vezes)

0 Membros e 1 Visitante estão a ver este tópico.

Offline mitsumi

  • Sub-Administrador
  • ****
  • Mensagens: 121842
  • Karma: +0/-0
WinSPS-S7 v6.05 Multilanguage
« em: 24 de Agosto de 2020, 14:50 »

WinSPS-S7 v6.05 Multilanguage | 104 Mb
What can you do with WinSPS-S7 V6? You can write your STEP7 program in STL, FBD or LAD. After this you can upload the written blocks to the on-board Software-PLC to simulate your program. Use the PLC Mask window to change the state of the digital and analog inputs and watch the results....

What can you do with WinSPS-S7 V6?

You can write your STEP7 program in STL, FBD or LAD.
After this you can upload the written blocks to the on-board Software-PLC to simulate your program.
Use the PLC Mask window to change the state of the digital and analog inputs and watch the results.
The intellisense window of the block editor shows only suitable addresses- so you can enter your code more efficiently.
The live address location window shows you all locations of the current address in the block editor.
The variable monitoring tool has a own web server. So you can watch the variables even on a smart phone or any other mobil device with a web-browser. You can also enable the speaker symbol in this table to here changing addresses over a wireless headset.

The integrated Software-PLC has a TCP/IP interface. You can connect a TP/OP to it to test your TP/OP functionality.
In the Pro-Edition of WinSPS-S7 you can                                                                                                                                                                                                also transfer the blocks into a real S7-PLC.
Furthermore you have all tools for diagnostic or troubleshooting purposes.
You can configurate your PLC with the integrated hardware configurator.

Key-Features:

WinSPS-S7 is a complete programming software for S7-PLC with many additional features
Write your PLC program in STL, LAD or FBD
Simulate your PLC program with a virtual PLC (PLC-Mask)
Import- and Export your original SIEMENS S7-Project
Build-In hardware configuration for (S7-300 PLCs, VIPA S7-PLCs, with Profibus-DP support)
S7-Intellisense for faster and better programming experience
Synchronize function: upload only modified blocks to the PLC with ease.
The build-in software PLC can also be connected via TCP/IP (for third party software/hardware, e.g. operator panels)
Special feature: watch the variable table on your smartphone
Special feature: hear changing addresses in the variable table with a wireless head-set

WinSPS-S7 is available in different editions:

Pro-Edition for comercial use
Pro-Edition (private use only)
Standard-Edition (this edition can not connect to a real PLC)
Starter-Edition (this edition can not connect to a real PLC, 1000 commands per cycle)

Operating System:

Can be used with the following operating systems:

Windows 10 (32- and 64 Bit)
Windows 8 (32- and 64 Bit)
Windows 7 (32- and 64 Bit)
Windows XP (32 Bit)
For all Editions: Home, Pro, Ultimate

Multi-Language Software:

Deutsch
English
Español
Français
Italiano

Home Page -
Código: [Seleccione]
https://www.mhj-tools.com/winsps-s7/]https://www.mhj-tools.com/winsps-s7/
Download link:
Só visivel para registados e com resposta ao tópico.

Only visible to registered and with a reply to the topic.

Links are Interchangeable - No Password - Single Extraction