Sonoris Multiband Compressor FIXED v1.0.0.0 WiN OSX

[mitsumi]

Sonoris Multiband Compressor v1.0.0.0 FIXED WiN / OSX | 4.5 Mb / 3.5 Mb

The Sonoris Multiband Compressor is a versatile multiband compressor suitable for mastering or mixing. It is a very transparent compressor that can also have some character if needed.

Top quality filters
The Sonoris Multiband Compressor has three independent frequency bands followed by three compressors based on the Sonoris Compressor. The three bands are created with special designed filters to avoid phase cancellation problems. These filters are known as Linkwitz-Riley crossover filters and have a very natural, analog like quality. By design they mix back flat. They don't introduce delay and are more efficient in use, unlike linear phase filters.

Shape to your liking
Transparency can be achieved by selecting auto-release and opto envelope emulation together with two soft knees. If a more warm sound is needed you can, for example, choose RC envelope emulation with a harder knee.

See what you're doing
The Sonoris Multiband Compressor has three high resolution gain reduction meters and a transfer graph so you can actually see what you are doing. The ratio is allowed to be lower than 1 so it's also an expander. Maximum ratio is infinite.

Create a multiband meter
The individual bands can also set to limiting, what results in a multiband limiter.

Finish it off with a limiter
The output section of the Sonoris Multiband Compressor also features a limiter. This guarantees that the output will never exceed the 0dB point. This limiter can also be used                                                                                                                                                                                                as an effect to warm up a signal.

Features
Phase correct Linkwitz-Riley crossover filters
Wide crossover ranges
Ratio ranging from 0.5:1 to infinity for compression, expansion and limiting
Attack ranging from 0 msec to 1 sec. Totally clickfree, even at low values
Selectable auto-attack on each band
Release ranging from 1 msec to 5 sec
Selectable auto-release on each band
Threshold ranging from -60 dBfs to 0 dBfs
Very flexible knee setting from hard to soft in 100 steps
A second knee that enables the compressor to adjust the ratio back to 1:1 above the threshold. Also adjustable in 100 steps from hard to soft knee
Two envelope types, RC and Opto
Mode: Normal, sidechain signal is the sum of left and right
Mode: Highest, sidechain signal is the highest value of the left and right channel, for multiband limiting
Mode: Left channel only for use with the Sonoris MS Codec plugin
Mode: Right channel only, as above
Output section limiter with limiter-action dependant light
Mousewheel support, including global when holding the control key
The gain transfers are shown graphically in real-time
Three high resolution gain reduction meters
Make up gain ranging from -25 dB to +25 dB
Four level meters
Track following
Full automation possible
Controls can be adjusted simultaneous for all bands
Low CPU load
Settings can be saved
64 bit integer math, except for the crossover filter code
TPDF dither is used to convert the 64 bit signal back to SAW format. The dither is generated in assembly language

Download link:

Só visivel para registados e com resposta ao tópico.

Only visible to registered and with a reply to the topic.

Links are Interchangeable - No Password - Single Extraction