Zuken E3.series 2018 version 19.12 Update | 295.8 mb
Zuken has released an update to E³.series 2018 version 19.00. The latest release contains new and enhanced functionality that further increases productivity throughout all phases of engineering, from design to manufacture.
Designer-04529 Variant/Option names are case sensitive
Designer-10187 Partly possible to do changes to read-only sheets in multi-user projects after changing sheets during command execution (e.g. "Insert -> Attribute Text")
Designer-10874 The COM method "Sym.GetCode" doesn't return anything with fields -"Prj.GetSymbolIds()" shall not return fields
Designer-22499 Place inline connector' command doesn't work in open nets without connected pins
Designer-30975 Signal "**NC**" can't be assigned to connector pin when this connector is already plugged as entire connector (pin group) in a view
Designer-31140 DBE: Nodes can be placed on top of each other in the symbol creation
Designer-32707 Incorrect placement of models on mountings when placingby multiple select
Designer-32715 Opening a Formboard sheet with active setting "Show information for option combinations" takes very long (performance)
Designer-32733 Moving bundles/twisted pairs between different cables in an overbraid causes ungrouping
Designer-32773 Graphic elements get lost at DWG-Import
Designer-32798 The COM method "Job.GetActiveTreeId" does not return any tree ID for variants/options tree
Designer-32814 Copy/Paste of assembly element creates a new assembly
Designer-32818 Sorting of pins in the Device tree differs from display within "Panel tree -placed / unplaced"
Designer-32822 Product (device designation) on sheet is not displayed when the project is set to read-only (MU)
Designer-32856 The "Alternative text as component code" doesn't work with components of type 'block'
Designer-32858 At update of table symbol the following error occurs with validation message:"E -ATTVAL_ITEM/[xxx] ([xxx])::ownptr is invalid (0))"
Designer-32864 Problems using 'Align Objects' with grouped terminals
Designer-32866 Panel -Routing -Target cable duct can't be routed due to collision with an undetectable component
Designer-32869 The Formboard table symbol in Multiuser displays also wire names of inactive options
Designer-32877 The "Alternative text as component code" is not showing correct value with assemblies
Designer-32878 Modifying the text type "Attribute" (#1000) by key F2 leads to following error "E -Error in Function get_template_cells(), ret = 14"
Designer-32905 The COM method "dev.Create" does not work with leading blanks in component name
Designer-32911 The text type "Device name" (#1010) remains empty on the twisted pair symbol, the text type "Device designation" (#12) shows the device deignation of the twisted pair symbol
Designer-32923 Split of connector pin on a Formboard view creates consistency error "E -CELL_ITEM/xxx (xxx)::devptr points to CONPIN_ITEM/xxx (xxx) with invalid item type''
Designer-32945 Impossible to place a single pin on a formboard sheet using the COM method "Sym.PlacePins" whenthe target position lays on the edge of the region
Designer-32949 When a subcircuit is created in Database Editor from an assembly used as template, the assembly's attributes are not taken over
Designer-32958 Negative values for the text size can create errors under certain circumstances (e.g. at DXF Export)
Designer-32959 Performance problems in E3 after highlighting signals
Designer-32961 Incorrect time for comparison is filed to the database (LASTUPDT) -Time zones are not considered
Designer-32962 Propably wrong display of preview at creation of a new sub-circuit in dbe and project
Designer-32970 The COM method "Group.place" returns red error message when "Use Read-only levels" is active
Designer-32971 When trying to place a connector on a connector symbol where a wire is connected to, following project inconsistency occurs 'E -CCID:001205: check_connected_cabwirs( xxx (xxx) ): cabwir 'xxx:xxx' is mounted to NODE_ITEM/xxx (xxx), but this is assigned to 'xxx' (CONPIN_ITEM/xxx (xxx))'
Designer-32984 The COM method "Graph.Place" doesn ́t move text box
Designer-32993 The COM method "Signal.FindPanelPath" ignors Default Wire Type on part signal of signal class
Designer-32996 Text type "Signal name" (#7) displays the signal name on symbol together with the sheet reference when it is alphanumerical although the text type "Sheet reference name" (#1091) is existing
Designer-33004 Text alignment can be changed on locked sheets using toolbar buttons
Designer-33006 The text type connection target format is not updated at deactivation of an option
Designer-33034 Copy of block connectors on a block in DBE returns error: "E -Error in function int __cdecl dbe_correct_paste_assignment(struct MODIFY_HANDLE *), ret = 19"
Designer-33036 Formboard table shows wire hidden by activated option in the first row instead of active wire
Designer-33042 The COM method "Device.GetOutlineIds" doesn't consider "GetterOptionHandlingMode"
Designer-33053 Move object via entry of coordinates is not possible outside the zoom area
Designer-33062 Formboard pin table is incompletely filled when options are inactive
Designer-33092 Unwanted values at wire seals for "Imperial" lead to incorrect selection
Designer-33094 User-defined signal is not transmittedafter connection
Designer-33105 No possibility to create a new characteristic of a symbol with the type attribute text template when an old version of it is existing in the database
Designer-33110 Error "Error in Function hntermplan" when opening a specific project
Designer-33111 E3.ViewerPlus 2017 may crash under certain circumstances after switch of language
Designer-33114 Paste Extended of panel sheet may lead to crash under certain circumstances
Designer-33116 Automatic display change of wire seal symbols doesn't work
Designer-33120 Resetting the database tree makes the folders and contentscollapse
Designer-33128 Opening the context menu of a device in Panel (right-click) takes very long with variants/options
Designer-33134 Wire is not routed (over signal) with active signal equivalence
Designer-33170 Options in the PDF export might be inactive
Designer-33172 The COM methods "Symbol.SendToForeground" and "Symbol.SendToBackground" don't work with shield symbols
Designer-33210 Inconsistency with block connectors may lead to crash of E3 under certain circumstances when opening in newer version
Designer-33249 Error message "Error in function test_visibility(), ret = 2" when executingthe command "Reconnect connection"
Designer-33268 Error message "E -Error in function action_place_block(), ret = 18" upon using the COM method "Sym.PlaceBlock" when no valid Parent Id is defined
Designer-33272 Impossible to fade out complete table symbol with one level
Designer-33278 The COM method "SetCounterpart" looks also for empty transfer values in the database instead of clearing the entry of the mating part on pin
Designer-33281 Symbols of a general device can't be connected to each other anymore -now possible again, can be controlled by a setting
Designer-33282 Movinglines on a sheet with options inherits the option to internal
Designer-33287 Wrong error message 'E -PCHAIN_ITEM/[xxx]::owner points to Unknown/[xxx]which doesn't exist' or internal validation returns error after using the command 'Purge Unused Objects'
Designer-33288 DBE: Search fields in the Model tab don't list any values
Designer-33318 Executing the "Update in project" command on a component with a free attribute text causes problems: "E -TEXT_ITEM/[xxx]([xxx])::objlnk is invalid (0)"
Designer-33339 When a connector master symbol is used as preview symbol for a general component, E3 may crash at display of preview under certain circumstances
Designer-33346 A connector view's view number can be changed to a device view's view number already existing (and vice versa)
Designer-33348 E3.ReportScripts: Default script "Reports -BoM" returns wrong results for mounting rails/cable ducts, when article number and component description differ
About Zuken E³.series E3.series is a Windows-based, scalable, easy-to-learn system for the design of wiring and control systems, hydraulics and pneumatics. The out-of-the-box solution includes schematic (for circuit and fluid diagrams), cable (for advanced electrical and fluid design), panel (for cabinet and panel layout), and formboard (for 1:1 wiring harness manufacturing drawings). Integrated with MCAD, E3.series is a complete design engineering solution from concept through physical realization and manufacturing output.
About Zuken. Zuken is a global provider of leading-edge software and consulting services for electrical and electronic design and manufacturing. Founded in 1976, Zuken has the longest track record of technological innovation and financial stability in the electronic design automation (EDA) software industry. The company's extensive experience, technological expertise and agility, combine to create world-class software solutions. Zuken's transparent working practices and integrity in all aspects of business produce long-lasting and successful customer partnerships that make Zuken a reliable long-term business partner.
Product: Zuken E³.series
Version: 2018 version 19.12 Update
Supported Architectures: 32bit / 64bit
Website Home Page : Só visivel para registados e com resposta ao tópico.Only visible to registered and with a reply to the topic.Language: multilanguage
System Requirements: PC
Supported Operating Systems: Windows 7even or newer / Server 2008 or 2012
Software Prerequisites: Zuken E³.series 2018 version 19.00 and above
Size: 295.8 mb
Download link:
Só visivel para registados e com resposta ao tópico.Only visible to registered and with a reply to the topic.Links are Interchangeable - No Password - Single Extraction
Cantinho Satkeys
