* Cantinho Satkeys

Refresh History
  • FELISCUNHA: Votosde um santo domingo para todo o auditório  4tj97u<z
    Hoje às 11:06
  • j.s.: bom fim de semana  49E09B4F
    23 de Novembro de 2024, 21:01
  • j.s.: try65hytr a todos
    23 de Novembro de 2024, 21:01
  • FELISCUNHA: dgtgtr   49E09B4F  e bom fim de semana
    23 de Novembro de 2024, 12:27
  • JPratas: try65hytr A Todos  101yd91 k7y8j0
    22 de Novembro de 2024, 02:46
  • j.s.: try65hytr a todos  4tj97u<z 4tj97u<z
    21 de Novembro de 2024, 18:43
  • FELISCUNHA: dgtgtr  pessoal   49E09B4F
    20 de Novembro de 2024, 12:26
  • JPratas: try65hytr Pessoal  4tj97u<z classic k7y8j0
    19 de Novembro de 2024, 02:06
  • FELISCUNHA: ghyt74   49E09B4F  e bom fim de semana  4tj97u<z
    16 de Novembro de 2024, 11:11
  • j.s.: bom fim de semana  49E09B4F
    15 de Novembro de 2024, 17:29
  • j.s.: try65hytr a todos  4tj97u<z
    15 de Novembro de 2024, 17:29
  • FELISCUNHA: ghyt74  pessoal   49E09B4F
    15 de Novembro de 2024, 10:07
  • JPratas: try65hytr A Todos  4tj97u<z classic k7y8j0
    15 de Novembro de 2024, 03:53
  • FELISCUNHA: dgtgtr   49E09B4F
    12 de Novembro de 2024, 12:25
  • JPratas: try65hytr Pessoal  classic k7y8j0 yu7gh8
    12 de Novembro de 2024, 01:59
  • j.s.: try65hytr a todos  4tj97u<z
    11 de Novembro de 2024, 19:31
  • cereal killa: try65hytr pessoal  2dgh8i
    11 de Novembro de 2024, 18:16
  • FELISCUNHA: ghyt74   49E09B4F  e bom fim de semana  4tj97u<z
    09 de Novembro de 2024, 11:43
  • JPratas: try65hytr Pessoal  classic k7y8j0
    08 de Novembro de 2024, 01:42
  • j.s.: try65hytr a todos  49E09B4F
    07 de Novembro de 2024, 18:10

Autor Tópico: Siemens NX 1888 Update Only  (Lida 215 vezes)

0 Membros e 1 Visitante estão a ver este tópico.

Online mitsumi

  • Moderador Global
  • ***
  • Mensagens: 117505
  • Karma: +0/-0
Siemens NX 1888 Update Only
« em: 19 de Outubro de 2019, 12:57 »

Siemens NX 1888 Update Only | 2.1 Gb
Languages: English, 中文, Čeština, Español, Français, Deutsch, Italiano, 日本語, 한국어,
Polski, Português, Русский
The Siemens PLM Software team is pleased to announce the availability of NX 1888 Series. This continuous release is robust and powerful, and it delivers advanced technologies for product design, development, and manufacturing in a single, multidisciplinary platform.

1884,8345593,Dynamic Tool Axis Problem with Machine Model
1884,8407430,TMG solver file update for NX1884 (svn revision 144536)
1884,8411499,Generation of NX JT files using Dispatcher nxtransdirect translator have issues
1884,8412009,VR Flexible parts are shown incorrectly
1884,8412286,"When NX takes the license, it slows down"
1884,8412801,SYS: Problems with using Borrowed License in NX1847 (freeze of NX)
1884,8413740,Parallel Generate doesnt work in MENCMachining item type with mandatory attr
1884,8420221,An .afm file takes a long time to display in nx 1847 (cf nx 11.0.2/12.0.2)...
1884,8424554,No sc_motion_solver license found when solving - Issue with Tokens
1884,8426831,TC mapped attribute linked to expression broken when item type changed in reuse
1884,8560737,Failed to solve indirect BEM with load recipe
1884,8560887,VL structure mocdel conversion problem for NV analysis model
1884,8560888,VL structure mocdel conversion problem for SP Tank
1884,8560889,VL structure mocdel conversion problem for Seal Surface Pressure 
1884,8560899,VL structure mocdel conversion problem for Cylinder Block
1884,8562108,GSO: not to make Mass connections 
1884,8562335,Problem by definition of mount strategy order change 
1884,8562668,Simcenter3D 2019.2 Motion token features issue 
1884,8562674,The solving error for model using FRF + Mode set in Simcenter3D 2019.2 
1884,8562938,No edges by group option for bolt connection\tin SC 2019.2 
1884,9021178,Not possible to create manual support 
1884,9112448,ER: Need different symbols for Sniped Angled and Sniped Square
1884,9310823,Radial Dimension - H7 elevated when combined with Format Fit with Tolerances
1884,9313423,LOP_B3.78: Running NXOPEN programremoves all parametric tools
1884,9318727,Display in VR is different than NX.
1884,9362449,Borrowed license for NX 1847 Series (VERSION SPECIFIC) performs slowly
1884,9386108,Loading the IPW in the simulation does not work
1884,9386664,Freeze during working with borrow license without connection to license server.
1884,9405711,NX Freezes when Borrowed License are listet in User Registry but they are not us
1884,9408781,Virtual reality in NX for deformable parts and part family
1884,9421134,NX 1855 session  running on a borrowed license freezes
1884,9421261,NX 1855 FREEZE
1884,9443567,NX 1847 periodically freezes then resumes when using a Borrowed license
1884,9444715,Replace component gives Error for specific draft
1884,9451786,Components excluded from replacement operation: Incorrect object for operation
1884,9455524,NXOpen::STLCreator creates a corrupt STL if the part has a Delete Body feature
1884,9456751,License problem with NX 
1884,9462610,Problem with borrowing license
1884,9462864,Freeze / Blocking when using a borrowed license
1884,9463049,Open sldasm in NX12.0.2 is dropping component names
1884,9467769,ER: Shell Expansion Drawing - traces for small brackets or plates
1884,9477713,SRS gives incorrect results with DMP
1884,9484685,NX1859 is randomly hanging and pausing while in use.
1884,9485324,Contour Description Scale of EasyFill not shown.
1884,9485780,Sol401 Glue Sliding with GNL fails to converge 
1884,9488903,CMM:Link to PMI Does Not Select Feature Geometry.   
1884,9490963,NXOpen::STLCreator creates a corrupt STL if the part has a Delete Body feature
1884,9494654,Delete Reference Set performance issue
1884,9499992,Problem with borrowed license - application hangs periodically.
1884,9500372,Basic Curves Trimming - change of line orientation
1884,9502792,Formatting error on GROUP card produces Access Violation error
1884,9502891,Improper group format causes access violation
1884,9503721,Tool Incorrectly Positioned in Verify - request Tue Doan 
1884,9505508,Sol401 Contact Tangential stiffness for modal - request for fix in 1884
1884,9507060,Data block Lama not created when secomb = yes
1884,9507554,The cause and workaround for SFM 22200
1884,9510717,NX 1847 series pauses while using a borrowed license. 
1884,9512947,NX Freezes when using borrowed license
1884,9516372,SOL402 deck with space in filename or path fails 
1884,9520190,TC mapped attribute linked to expression broken when item type changed in reuse
1884,9520883,NX 1847 hangs intermittently when using a borrowed license..
1884,9523198,Save breaks attribute to attibute link.
1884,9523264,Distributed Load not recognizing the defined coordinate system 
1884,9525152,Contact model (cgaps) gives wrong result with nxn 12.0.2 - ok with nxn 11.0.2
1884,9526603,Time between SOL 101 and SOL 402,NASTRAN,STRUCTURES,SOL_402
1884,9527531,High Quality Image cannot be generated outside of Advanced Studio   
1884,9528263,NX1872 Impeller Machining  operation impeller blade finish unclean toolpath
1884,9530790,Curve selection of operation from file-new template lost
1884,9530802,NX slowing down with borrowed license 
1884,9531700,NXOpen::STLCreator creates a corrupt STL if the part has a Delete Body feature 
1884,9532974,No results in seam weld durability analysis   
1884,9534049,NX 1872 randomly freezing for several minutes 
1884,9535101,Changes to named references prevent saving in NX from 12.0.2 and TC11.6 onwards
1884,9535261,UFM in 2019.1 not in 12
1884,9535710,Incompelete bevel gear created
1884,9536289,Cloning assembly shows error on Clone Exceptions 
1884,9536994,Specialist Durability -Mean stress correction method Morrow seems not correct
1884,9538672,NX will repeatedly freeze or hang for 5-10 minutes
1884,9540508,SC Motion Solver does  not work with Token-License as it should 
1884,9541465,Checkmate gives unexpected results for Check Connection Compatibility check
1884,9541524,NC: Problems with Signalmapping between NX MCD and OPC UA from Beckhoff 
1884,9542095,The flexible body license is not available but no flexible bodies
1884,9542645,Cannot edit hull feature   
1884,9542858,Failed to initialize the Simcenter Nastran license server
1884,9544805,License of Simcenter 3D Motion not available 
1884,9545496,Token-based licensing issue with Simcenter 3D Motion 2019.2 - Patch request
1884,9545837,NX Flexible pipe - Problem with extremity of preformed curve Composite Curve
1884,9546059,SFM 6551 in SOL402
1884,9546847,Customer is unable to pull tolkens for Mechatronics simulation 
1884,9546873,NX 1876 works for 3 mins  the locks up for 3 mins. BORROWED license
1884,9549479,About importing CATIA V5 data (Not consume the license) 
1884,9550738,Simcenter unable to run with the Simcenter token licenses
1884,9552031,Freeze during working with borrow license without connection to license server
1884,9553933,SOL401 distributed solving memory access error
1884,9560170,Trim Body fails with Unable to perform Boolean once Shadow Curve existed
1884,9573004,NX 1880 freeze when users borrow licenses
1880,7774710,Request to create the scanning path while rotating table. 
1880,7917454,Want to control Datum Letter so that greater than 2 characters are inputted.
1880,8331747,ER - Parallel Generate - Temporary filename incremented from existing part file
1880,8404327,Durability for 402
1880,8414690,Update of NX-Continous Release over Mapped Drive will destroy UGII_BASE_DIR 
1880,8420160,NX 11.0.1 mp2 .fem file cannot be opened in nx 12.0.x or later versions...
1880,8423195,NX Installation Guide needs correction for regsvr32 /u advise
1880,8423519,Pre-solver crashes when doing mesh mapping using LMS file 
1880,8425165,Not able to open saved part with CAM data * URGENT
1880,8559410,Cannot execute NX Nastran with severe (174): SIGSEGV  segmentation fault occurre
1880,8562108,GSO: not to make Mass connections 
1880,9021178,Not possible to create manual support 
1880,9093818,Calculation Method as Optional on Tolerance Operation of type Distance Between
1880,9094071,Using create region  support surface and support area not shown & redundant
1880,9317205,ER: Support Bracket symbols on drawing
1880,9326196,FBM - first run of Create Feature Process has bad performance 
1880,9373903,Error when adding friction to a joint 
1880,9384160,Thread depth not displayed correctly on model 
1880,9388348,Texts length become longer origin after translated to dwg.
1880,9428539,FBM - MRL - Initial Caching of Tools takes too long.
1880,9479667,NXOpen.CAE.AfuManager.ListRecordInformation Anomolous Results When Write to File
1880,9480559,NX-CAM Contour toolpaths generate with gouges
1880,9487926,Section drawing feature causes modeler error while creating a section view 
1880,9495116,NXOpen.UF.UFLib.ExecuteQuery fails in managed NX mode for INCLASS_get_count
1880,9499520,ER: Need an indicator to show profile cutout is right handed or left handed
1880,9499652,Electrode Drafting Naming Rule disregards MW_EW_DRAWING_PART_NAME_RULE
1880,9501415,CSE does not work with waved blank and suppressed component in NX12 
1880,9502262,Force sensor error when there are friction in a link ( 
1880,9502689,Step ap242 translator export geometry of excluded layers 
1880,9504068,INTERNAL ERROR opening .sim file (new/old) in Simcenter 3d - Portuguese language
1880,9505397,Enter Manufacturing throws internal error after deleting Program Group by NXOpen
1880,9507187,Penetration Management - The Displayed part must be a valid workset
1880,9507671,ISV Model slows NXOpen scritpt dramatically in NX12
1880,9508805,Different German translations in Ribbon and Dialog for Move Object command
1880,9512158,PTS part remains work part after added to assembly  making it an assembly.
1880,9524646,Cannot edit routing pipe bend table while NX open.
1880,9526146,Electrode EDM drawing doesnt use electrode name as advertised
1880,9527250,Simcenter - Ansys time domain import 
1880,9528968,CAM Japanese translation of Linear is wrong.
1880,9532310,Part file will not open
1880,9537908,Error when open CAM Part File (Severe error  580009   index 223 out of range)
1880,9541473,Translated Japanese of NX1872/1876 Start menu icon name is wrong 
1880,9542451,No Shortcuts for Quality Dashboard and Validation Rule Editor found anymore
1880,9550941,CAM-Part cannot been opened after saving in NX1876    array Attribut out of rang
1880,9551016,Not able to open saved part with CAM data
1880,9555146,Problem with opening file after save in NX1876 - Severe error  580009
1876,1986895,Step file cant be imported - Invalid toroidal_surface definition.
1876,8387207,Bumper pendulum placed at wrong contact point   
1876,8396322,STEP Import abort 
1876,8408779,Misleading deprecated notes in NX12 Routing APV XML and README files
1876,8418943,Suppress Beta version of NX message 
1876,8560541,HTML report does not work for an assembly with bundles
1876,9064202,Different Position between Tool_Tip and Tool_Mount is not honoured inside Sys-Tr
1876,9071549,FPC Design App - Attach bodies to flex and bring them along when flattening
1876,9213628,Flange: Corner Relief partly removes Bend from opposite side 
1876,9281984,Internal error with Make Unique 
1876,9287087,After Flange creation the Flange width is no more the same (-0 002 mm)
1876,9314631,Sheet Metal Flange is always too small in the model 
1876,9326801,CAE JT missing faces
1876,9327215,Sheet Metal Flange is always too small in the model
1876,9329203,By adding a flange  a bend on the others side of the part is almost vanished
1876,9348613,Error during multiflange depending on the selection sequence.
1876,9358567,Selection Scope in Routing Qualify Part limited to Within Work Part Only
1876,9364407,Insert multiple flange failed
1876,9364527,Qualify Part does not allow selection in Entire Assembly anymore
1876,9365209,Wrong result with Multiflange feautre in NX 12.0.2
1876,9375954,Measuring width of Flanges not accurate 
1876,9383478,Regression: selection scope cannot be changed anymore 
1876,9384160,Thread depth not displayed correctly on model
1876,9417958,Internal error memory access violation when opening NX assembly
1876,9462163,Connected Ports are displayed when selecting a run
1876,9462264,MFK (Remove object_type from non default domain)
1876,9466471,Components do not highlight in Component Navigator after changing applications.
1876,9475101,NC: NXMGR:  On save  NX is creating second ugpart named reference
1876,9479055,Display node numbers
1876,9489746,RCPs get deleted at corners in logical routing.
1876,9498486,Plate type Edge reinforcement loses central Alignment
1876,9502378,Activating Solutions takes long time  NX had to be killed from Task Manager   

Siemens become the first major CAD/CAM/CAE vendor    to deliver its software using Continuous Release methodology in January 2019.

With this deployment model, NX customers will be able to access new improvements more quickly while reducing the effort required to implement NX. This makes Siemens the first major CAD / CAM / CAE software provider to publish product updates in this way and  provides innovations and improvements in the software even faster.

The main change for you as a customer are the monthly update releases, which are made available to you within a single release series. Bugs are therefore no longer fixed in different releases, just in the latest update and even smaller extensions are integrated promptly, which raises the quality to a new level. Significant                                                                                                                                                                                                         enhancements that may affect the schema and compatibility are expected approximately every six months. Whether and when you roll out updates in your company, if you automate the updates or if you want to use different versions on the same hardware remains your decision.

Siemens PLM Software   a business unit of the Siemens Digital Factory Division, is a leading global provider of product lifecycle management (PLM) and manufacturing operations management (MOM) software, systems and services with over 15 million licensed seats and more than 140,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively with its customers to provide industry software solutions that help companies everywhere achieve a sustainable competitive advantage by making real the innovations that matter.

Product: Siemens NX
Version: 1888 *
Supported Architectures: x64
Website Home Page :
Só visivel para registados e com resposta ao tópico.

Only visible to registered and with a reply to the topic.
Language: multilanguage
System Requirements: PC **
Supported Operating Systems: **
Size:   2.1 Gb

         Siemens.NX.1888.Win64.Full.Setup.iso
Siemens.NX.1888.Win64.Update.Only.iso
Siemens.NX.1872.Documentation_English.iso
Siemens.NX.1872.Add-Ons.iso

ATTENTION!        On some computers there were problems updating previous NX 1872 Series (187-1884) to version 1888, both with a full 1888 installer and with an update package only. In this case, the only way to install version 1888 is to remove previous versions of the NX 1872 Series (1872-1884) and fully setup of version 1888   

        Minimum Operating Systems
- Microsoft Windows 10 (64-bit) Pro and Enterprise editions

Windows 10
Windows 10 is the minimum supported release for NX 1867. The supported versions of Windows 10 are the Professional and Enterprise editions utilizing either the Current Branch for Business (CBB) or Long Term Service Branch (LTSB) update branch. The Current Branch (CB) update option is not supported. Windows 10 is also available for NX 10.0.3 and later versions including NX 1867. Any caveats or special instructions are provided in the SFB announcing support.
Windows 7 and 8.1
Windows 7 has reached the end of life and mainstream support has ended. Windows 8.1 is still supported by Microsoft, but was rarely deployed. These two versions of Windows are no longer supported by NX 1867. Siemens PLM Software has not performed testing on these versions and cannot resolve any issues related to NX 1867 running on these operating systems.
Windows XP and Vista
Windows XP support from Microsoft has ended and Vista was rarely deployed so these two versions of Windows are not supported by NX 1867. Siemens PLM Software has not performed testing on these versions and cannot resolve any issues related to NX 1867 running on these operating systems.

Recommended System Configuration:
- 64-bit Windows 10 operating system
- 4 GB RAM minimum, 8 GB or 16 GB RAM recommended
- True Color (32-bit) or 16 million colors (24-bit)
- Screen Resolution: 1280 x 1024 or higher, widescreen format   

Download link:
Só visivel para registados e com resposta ao tópico.

Only visible to registered and with a reply to the topic.

Links are Interchangeable - No Password - Single Extraction