CAMWorks 2019 SP3.0 Build 2019.08.02 (x64) | 1.5 Gb
Languages: 中文 Simplified, 中文 Traditional, Français, Deutsch, Italiano, 日本語, Polski,
Português-Brazilian, Русский, Español, Türkçe, 한국어, Čeština
GeometricPLM is pleased to announce the availability of CAMWorks 2019 SP3.0, is a modern CAM programming solution that automates the creation of toolpaths inside SOLIDWORKS. Powering the SOLIDWORKS CAM, there is now a seamless associative path for all the SOLIDWORKS users machining and turning requirements.
CW-90978 In Turn and Mill-Turn mode, the user will not be able to assign feeds and speeds to any operations using tools from the second Rear or Front turrets. Because of such a limitation, the user will not be able to generate any toolpaths.
CW-89435 After combining the operations in CAMWorks operations tree when the remaining operations are deleted and emptied from recycle bin, CAMWorks crashes.
CW-89043 The value obtained for the bottom radius of the Keyway tool is incorrect when populated through API interface.
CW-88916 Simulation error is seen while simulating toolpaths generated with Corner Round Tools. This happens when the option "Tool Shoulder/Shank Pause on collision" is enabled in the Simulate Toolpath dialog box.
CW-88878 In CAMWorks 2019 SP3 Version, the Edit Cutting conditions are incorrectly populated in CAMWorks.
CW-88682 If the machining depth for a hole feature is defined using the expression of "Feature depth" then, the machining depth of a drill operation changes upon updating the operation parameters by doing Generate Operation Plan again.
CW-88585 AIn assembly mode, the user defined work co-ordinate offsets for specific Mill part setups are applied to all other Mill part setups present in the assembly.
CW-88427 Provision to install the CAMWorks application in silent mode should be made available; especially for users who are inconvenienced with having to manually install/upgrade CAMWorks application on multiple machines.
CW-88374 For the specific Mill part, the rough mill toolpath generated for a countersink hole gouges the feature when the dimensions of the feature are modified
CW-88269 For the specific Mill part, the existing toolpath of Contour Mill operation for a closed Curve feature gouges the part when it is regenerated in CAMWorks 2019.
CW-88254 The Preview image displayed for Offset Roughing and VoluMill pattern on wrapped features areincorrect.
CW-88253 In CAMWorks 2019 when Extract Machinable Features is done then, the threaded holes are not recognized with the strategy of Thread. This happens when a TechDB of earlier version is imported into CAMWorks 2019.
CW-88052 For the specific customized TechDB, when the unit is set to "Inch"modethen,the Flat End Mill window is not displayed in the TechDB App.
CW-88053 In Spanish language version of CAMWorks, when user toggles the % option for First Cut Amount and Final Cut Amount in Contour Mill operation then, the spin control options for the value fields disappear.
CW-88034 When an earlier version of TechDB which has customized data is imported into the latest version of TechDB then, incorrect list of default strategies for Milling is observed.
CW-88016 In Assembly mode, the user defined "Work Coordinate" offset values are not retained when the Mill Part Setup Parameter dialog is closed by accepting the changes. The values are reset to the older ones.
CW-87930 When SQLite based TechDB from an earlier version is imported intothe latest version of CAMWorks then, incorrect list of default strategies for Milling is observed.
CW-87734 In Czech language version of CAMWorks, the "Move Up" and "Move Down" buttons in Feature Sort dialog box should be aligned correctly.
CW-87687 Add an API to "Define coolant from" and "Define tool diameter and length offset from" for assembly machine.
CW-87663 The toolpath for Rough Mill operation with pattern type set to Volumill gouges the islands present in the feature. This happens when the islands have a chamfer at the top and the feature has a bottom fillet.
CW-87639 In CAMWorks 2019 version, the stock values for "STOCK_MAX_Z" and "STOCK_MIN_Z"are incorrectly generated in the posted file.
CW-87631 In CAMWorks Virtual Machineof Hurco controller, incorrect result of executing the G68.2 command is observed.
CW-87603 CAMWorks message to notify the range of the diameter is displayed continuously when the user modifies the 'Body diameter' of the face mill tool.
CW-87566 When the hole feature attribute is modified using API, then the designation and depth parameters are not altered.
CW-87546 For Pencil Mill Operation, when the parameter "Bitangency angle" is changed in the pattern tab of operation parameters dialog box, then the image for bitangency angle field is not displayed.
CW-87499 The cut direction of the Curve feature changes it'sdirection when the associated toolpath for the same is generated.
CW-87448 In turn threading the spring passes are not output in the posted code when the command of G92-Semi automatic threading is used for post processing.
CW-87441 For SQLLite based TechDB, Turn tooling>>Tap cutting strategies menu, user cannot select a different tool for the turn tap operation unless a Mill tap operation is defined.
CW-87430 In CAMWorks Virtual Machine of Heidenhain Controller, the Z axis moves in milling are not simulated.
CW-87415 In Turn module, after simulation if the user selects chips and deletes them using CTRL D option then, the simulated stock is deleted from the display area.
CW-87402 In CAMWorks improve the file save history options so that the user will know if the file has been saved by other users in the same version.
CW-87376 In Czech language version of CAMWorks, the parameter "Depth" is incorrectly translatedin Tap cutting and Tap rolling dialog box.
CW-87338 For the specific Assembly, the toolpath of Rough Mill operation with pattern type set to Volumill doesn't adhere tothe user defined ramp angle and smoothening radius. The tool plunges into the material.
CW-87318 An error message of "Tool parameters have changed" is displayed when operation parameters are edited in CAMWorks. This behavior is seen after generating operation plan post importing a TechDB from earlier version into CAMWorks 2019.
CW-87281 In TechDB App, Mill Tooling>>Threading menu the "Spindle Type" for turn tap operations is set to sub spindle whereas the spindle type for the tap feature is set to Main spindle. Due to this no operations will be generated in CAMWorks after executing Generate Operation Plan.
CW-87132 In CAMWorks Virtual Machine while using Siemens controller,an error message is observed while simulating circular moves.
CW-87128 In CAMWorks sync manager, user should not be allowed to define the wait codes using negative values.
CW-87099 Add a new post variable "PRIMARY_TOOL_TURRET" that returns primary tool turret for pinch turning.
CW-86911 The cut direction of the curve feature set by the user is flipped after the user closes the 2.5 axis feature dialog by accepting in Ok button.
CW-86728 In CAMWorks while defining curves if 'Select tangency' option is used to create desired profile then, the selected segments are not added to the resultant profile.
CW-86504 The thread insert oriented on Front turret is incorrectly displayed in CAMWorks and in CAMWorks Virtual Machine. 42.CW-86412CSR-8470TechDBIn SQLite based TechDB, Mill tooling>>Cutters menu the "Comment" field cannot be resized.
CW-86359 For the specific Assembly Part, significant amount of time taken to calculate the toolpath for drill operation.
CW-86261 If the machining depth of countersink hole is defined using the expression of "Countersink diameter" then, the machining depth of the countersink operation changes upon updating the operation parameters by doing Generate Operation Plan again.
CW-86039 For the specific part, an error message is observed while simulating the toolpaths and user will not be able to complete the simulation.
CW-85867 For Countersink operation, the value for the parameter "Machining Depth" and "Diameter created" changes when part data is rebuilt because of a change.
CW-85468 For the specific Turn part, the toolpath for Turn Rough operation is incorrectly generated with user defined insert.
CW-85425 The preview image for the parameter of "Avoid small profiles" on Advanced tab of 3 Axis operation needs to be improved.
CW-85016 With the specific assembly, SOLIDWORKS crash is seen while editing the pattern feature along with CAMWorks as an add in.
CW-84373 In Wire EDM user will not be able to simulate the toolpaths of the die feature if the toolpath is generated with land and taper.
CW-83678 For the specific Mill part, CAMWorks takes lot of time to generate operations for the features present in the CAMWorks feature tree.
CW-82243 Incorrect toolpath is generated for a Thread Mill operation when multiple side passes are generated by setting a previous allowance.
CW-78808 For the specific customized TechDB, the user is unable to add a Countersink tool to the tool crib.
CW-77148 In the CAMWorks NC Editor, an error message of "File open error" is displayed when 'Make Tool List' is selected in the NC functions of CAMWorks NC editor.
CW-76009 The primary driving point for the Groove insert set by the user is not retained after closing the operation parameter dialog box by selecting Ok button. It is always set to 'Left'.
CW-70848 In a rough mill toolpath with pattern type set to 'Volumill' on a Mill-Turn machine, the moves defined by 'Advanced approach and retract' are not generated.
CWR-1600 When 3 Axis toolpath generation method is set to Advanced, the toolpath of Area Clearance operation with 'Hit Flat' option enabled violates the user defined contain area.
CWR-1599 When 3 Axis toolpath generation method is set to Advanced, the toolpath for Z level operation is not generated if the ramp angle value under links is set to lesser than 15 degrees.
CWR-1596 When 3 Axis toolpath generation method is set to Advanced, thenthe toolpath for Area Clearance operation with rest machining method set to WIP violates the user defined contain area.
CWR-1595 When 3 Axis toolpath generation method is set to Advanced, then the toolpath for Area Clearance operationviolates the user defined contain area.
CWR-1594 When 3 Axis toolpath generation method is set to Advanced, then for the specific part the toolpath for Z Level operation with a taper ball end mill is incorrectly generated.
CWR-1591 For the specific part, when the 3-axis toolpath generation method is set to 'Advanced method' then, the toolpath for Z level operation is not generated with user defined tool.
CWR-1584 When 3 Axis toolpath generation method is set to Advanced, then the toolpath generated for Pattern Project operation with negative allowance values is incorrect.
CWR-1582 When 3 Axis toolpath generation method is set to Advanced, then the toolpath for Area Clearance operation is not generated when the holder avoidance is enabled.
CWR-1575 When 3 Axis toolpath generation method is set to Advanced, then for the specific part, the toolpath for Z Level operation with Mach deviation set to 0.001mm is incorrectly generated.
CAMWorks for SOLIDWORKS was the first fully integrated computer-aided manufacturing (CAM) solution designed exclusively to operate in SOLIDWORKS and the first to offer knowledge-based, feature recognition, and associative machining capabilities within SOLIDWORKS.
CAMWorks uses the same SOLIDWORKS geometry to generate toolpaths to ensure the part you machine is the same part you've modeled. Toolpath simulation allows users to compare "as designed" parts to "as machined" parts. The part model-to-toolpath associativity in CAMWorks increases machining productivity and lowers manufacturing costs by eliminating time-consuming CAM system rework due to design updates.
CAMWorks eliminates the drudgery of CNC programming with Intelligent Machining through automation. Pioneered by Geometric Technologies, this suite of tools automates the generation of toolpaths based on a knowledge-based database. It eliminates hours of complex programming through Automatic Feature Recognition (AFR) that automatically defines prismatic machinable features, while the TechDBTM (Technology Database) defines machining operations to automatically generate accurate toolpaths at the click of a button.
CAMWorks machining modules include: 2½ Axis Mill, 3 Axis Mill, Turning, Mill-Turn with 5 Axis Simultaneous Machining Support, 4/5 Axis Simultaneous Machining, and Wire EDM.
CAMWorks 2019 delivers many enhancements and improvements, most created in direct response to customer requests. This release focuses onhelping you program the parts in faster and easier way.It also introduces an Additive Manufacturing module that can used togenerate Build Tickets (3D data) required to print 3D print part models.
GeometricPLM by HCL Technologies a specialist in the domain of engineering solutions, services and technologies. Its portfolio of Global Engineering services, Product Lifecycle Management (PLM) solutions, Embedded System solutions, and Digital Technology solutions enables companies to formulate, implement, and execute global engineering and manufacturing strategies aimed at achieving greater efficiencies in the product realization lifecycle.
On April 1st 2016, Geometric got into an agreement with HCL Technologies to transfer of its business to HCL Tech by way of demerger, except for its 58% share in the joint venture with Dassault Systèmes (3DS) (3DPLM Software Solutions Limited (3DPLM)). The transition has become effective on March 2nd 2017, after seeking all statutory approvals.
Product: CAMWorks
Version: 2019 SP3.0 build 2019/0802 (02-August-2019)
Supported Architectures: x64
Website Home Page : Só visivel para registados e com resposta ao tópico.Only visible to registered and with a reply to the topic.Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: *
Size: 1.5 Gb
Before installing CAMWorks 2019, ensure that the following system requirements are fulfilled:
Supported Microsoft Windows Operating Systems - 64-bit version of Windows 10
- 64-bit version of Windows 8.1
- 64-bit version of Windows 7 (SP1 or higher)
** Home editions of the above Operating Systems are not supported.
Supported CAD applications CAMWorks runs as an Add-in within SOLIDWORKS or CAMWorks Solids. The following versions of CAD applications support CAMWorks 2019 x64:
- 64-bit version of SOLIDWORKS 2019
- 64-bit version of CAMWorks Solids 2019
- 64-bit version of SOLIDWORKS 2018
- 64-bit version of CAMWorks Solids 2018
Hardware Requirements RAM: 8 GB or more recommended
Video Card: Certified cards and drivers
Processor: Intel or AMD processors with SSE2 support. 64-bit operating system required.
USB port: User may choose to have CAMWorks license on a USB dongle (key). CAMWorks Hardware dongle (key)plugs into the USB port.
Network: Microsoft's Windows Networking and Active Directory network environments.
Install Media: Broadband Internet Connection
Download link:
Só visivel para registados e com resposta ao tópico.Only visible to registered and with a reply to the topic.Links are Interchangeable - No Password - Single Extraction
Cantinho Satkeys
