File Size: 427.9 MB
Creo Expert Moldbase Extension contains customized detailed slabs of slabs and individual elements from all leading suppliers, taking into account the requirements of the main standards in this area.
When creating a model block, Creo Expert Moldbase Extension automatically generates an assembly drawing, specification and slab drawings, taking into account the ESKD requirements.
Shaping components can be created directly in Creo Expert Moldbase Extension, or you can use massing components created in CreoTool Design.
Creo Expert Moldbase Extension provides a dedicated graphical interface with a schematic 2D view of both finished model block designs and individual components. At the same time, you can create and use your designs, components, types of used injection molding machines, enter in the database of your suppliers.
The selection of the main parameters of the mold components is carried out in a two-dimensional mode. When it is necessary to specify the parameters for placing a particular component, the designer refers to the three-dimensional structure. This approach greatly speeds up the mold design process.
As a rule, full-fledged three-dimensional models of the mold assembly with holes, grooves, etc. made in the plates are formed in an automated mode. In this case, all holes and grooves are dependent - when you delete a component for which these structural elements were made, they are also deleted. When you change the size and location of components, these geometries are automatically rebuilt.
Creo Expert Moldbase Extension automatically places fasteners, calculates the length of pushers and marks, and creates cuts along the part's contour. To facilitate visualization, Creo Expert Moldbase Extension allows you to turn on / off the display of any component.
Creo Expert Moldbase Extension implements an animation-based mold reveal mechanism with an analysis for the intersection of components. The following calculations are possible:
comparing the compressive force of the machine and the pressure generated inside the mold;
the force acting on the wedge during its movement (in the mechanism of the movable rod) at a given stroke;
wedge length;
the angle of the inclined pusher;
delays (with double opening of the model block);
the total design cost for making the mold.
Main advantages
High productivity in the design of a model block due to the fact that the designer creates a mold from ready-made adaptive components - "cubes" for which drawing templates have already been created.
Reduced chance of errors as component placement and all required cutouts with appropriate clearances are fully automated.
The 2D user interface with visualization of changes allows for quick study of the mold without wasting time on the regeneration of the 3D model.
Development of a mold for a specific casting machine with the calculation of the required clamping force.
Automated creation of a control program for machining holes in plates.
Calculation of the cost of the mold.
Create your own library of plates, components, structures of mechanisms and model blocks in dialogue mode.
Quick learning module, interactive reference guide with animations.
Key features
Automatic placement of mold components with subsequent removal of material in the plates.
Automatic generation of specifications, assembly drawings and slab drawings.
Automatic creation of associative hole tables in drawings.
Creation of animation of the mode of operation of the mold with analysis for the intersection of components.
Libraries of standard blocks of molds and individual parts of leading suppliers: DME, DMS, EOC, Futaba, Misumi, HASCO, KLA, Meusburger, Pedrotti, Rabourdin, Strack, FCPK and libraries according to GOST of the following nomenclature:
model block designs (standard set of all types sizes, double push, double disclosure);
a set of plates and insulation;
centering elements (bushings, columns);
shanks;
locks;
gating and central bushings;
pushers and counter pushers;
stops;
fasteners;
pins;
supports;
circuits and elements of the cooling system;
moving rod mechanisms;
inclined pushing mechanisms;
double opening mechanisms;
transmission mechanisms to obtain threaded models;
hot runner diagrams, nozzles, manifolds, flanges.
Create custom libraries with your own standard designs and mold parts.
What's New:Enhancements
Add STRACK OXA plate size.
Add new Hasco components [RM-10793]: Z98HT, Z21, Z031, Z032, Z811HT, Z4501, Z458.
Update existing Hasco components: Z03, Z11, Z40, Z43, Z50, Z81, Z511, Z555, Z556, Z557, Z691, Z721, Z725, Z811, Z051, Z94, Z942, Z1212, Z1213, Z185, Z9430.
Remove obsolete Hasco components: K100, K1000, K107, K500, K501, K505, K506, TD(tubular dowel)
Add missing Meusburger cooling component E2101. [RM-10520]
Improvements
Show Library Component Dialog again in case assemby references are not yet fully defined and user select OK button. [RM-11675]
Bugfixes
Issue fixed: Missing translations in BOM column names. [SPR-12814097] [RM-11863]
Issue fixed: Copy drawing will not ignore for plates if option EMX_CHECK_DWG_TYPES is set to "-". [RM-11674]
Issue fixed: The assembly of the ejectors fails with different assembly directions for a reference part with the error "Cannot assemble the cutouts.". [RM-11559] [SPR-1241162]
Issue fixed: Balloons can not be placed within local sections on drawing views. [RM-12050]
Issue fixed: ibrary component fails to cut one of the parts. [RM-11393]
Issue fixed: Message, which tells user that a guide or screw diameter is different compared to required diameter in moldbase defintion, is not informative. [RM-12088]
Issue fixed: In case udf group is part of refrence pattern and leader group is not inside of model, UDF gets deleted while modifying component (e.g. second rail model) [RM-12087]
Download link:
Só visivel para registados e com resposta ao tópico.Only visible to registered and with a reply to the topic.Links are Interchangeable - No Password - Single Extraction
Cantinho Satkeys
