EMX (Expert Moldbase Extentions) 12.0.2.8(9) for Creo 4.0-6.0 | 751.1 mb
B&W Software, the leading global provider of add-on applications for the 3D-CAD System Creo Parametric, is pleased to announce the availability of Expert Moldbase Extension (EMX) 12.0.2.8 for PTC Creo 4.0-6.0. Use EMX to create a mold base as a regular assembly.
In this release we improved the functionality to transfer surface parameters from the reference part to insert parts in the cavity assembly. The algorithm is now independent from the Creo configuration option ENABLE_MOLD_EXTRACT_COLORING and works by comparing the surface geometry directly. Therefore, it's now possible to also transfer parameters on parting surfaces defined within the reference part.
Important note:EMX 10.0 and 12.0 will be out of maintenance after these releases. All enhancements for EMX will be shipped in EMX 13.0 which is compatible with Creo 7.0.
12.0.2.8 ChangelogEnhancements- Add new and update existing D-M-E Europe locating rings: F1360, F1367, RB, DHR21, R19, R20, R22, R23, R40, R60, R60L, RB60 and RB90
- Add new and update exisitng D-M-E Europe guide components: R01, R02, R03, R03W, R04, R04W, R05, R08, R09, APD, IPWC, IPNH, FBC, FBN, FSC, FSN, FB120, FB140, FW14, GB112, GB113, GB114, GEB, TD, ZH, F1000, F1010, F1020, F1030, F1040, F1100, F1110, F1120, F1121, F1125 F1126, F1127, F1140, F1144, F1145, 1150, F1332, FW1213. [RM-9347] [RM-9346]
- Add new and update existing D-M-E Europe support Pillars: SP, FW28, FW29.
- Add new and update existing D-M-E Europe ejector pins: CHE28, EAH28, ENA05, ENC05, EOA05, EPA05, EPC05, EPD28, ERA05, ERFAQ, EDC, EDH, PCM, FW, FK, S, KS, EAV, F2R and F4R. [RM-10587]
- Add D-M-E Europe knockout components: F1050 and 1515.
- Add MEUSBURGER knockout component: E1515.
Improvements- Move MEUSBURGER knockout E1514 from screw to knockout category.
- Improve MEUSBURGER ejector package guiding unit with collar E1325
- Improve MEUSBURGER ejector package guiding unit E1330
Bugfixes- Issued fixed: ssue in Meusburger component E3143_ and E3141_. [RM-10311]
- Issued fixed: Creo Parametric configured with EMX exits prematurely when modifying surface in mold assembly. [RM-10395] [SPR-10621485]
- Issued fixed: Ordernumber of Meusburger F53 plates is not correct. [RM-10541]
- Issued fixed: Dimension error in MEUSBURGER E3119 silder component. [RM-10544]
- Issued fixed: IdentifyTrimSurfaces functionality is not available anymore in Part and Assembly Mode [RM-10579]
- Issued fixed: Invalid Dimension in Meusburger FM90 babyplast guide package. [RM-10602]
- Issued fixed: Do not allow to define a new ejector with existing modelname. [RM-10718]
- Issued fixed: In case different ejector typ is selected and nominal values are not selected the ordernumber is incorrect. [RM-10719]
- Issued fixed: Automatic chamfer creation does not work for patterned components. [RM-10736]
- Issued fixed: Wrong BORE_REF_DIA values in HASCO cooling component Z98. [RM-10789]
- Issued fixed: HASCO core retainer plates can not be selected. [RM-10792]
- Issued fixed: Crash in case floating licenese is released and flexlm version is 11.12 and older. [RM-10848]
12.0.2.9 ChangelogImprovements- Improve algorithm when transfering surface parameters from reference part to extract parts. [RM-11256]
- Improve set position behavior when reopening dialogs on multiple monitors. [RM-11252]
Bugfixes- Issue fixed: Highlighting of components does not work anymore in drawing. [RM-11185]
- Issue fixed: Some menus in Simplified Chinese version EMX 13.0.2.0 are not translated by yet, for example, "Hydraulic Component", "Pneumatic Component", "Fluid Components" and "Remove all Components by Type" under EMX 元件 tab [RM-11297] [SPR-12581939]
- Issue fixed: Udf name is not taken into account in chamfer size rules. [RM-11329]
- Issue fixed: Parameter Designation status is not removed in case definition was changes from YES to NO. [RM-11377]
- Issue fixed in DIN580 screw [RM-11521]
- Issue fixed: Problem with line Up and down pushbutton in case of empty cell values. [RM-11541]
- Issue fixed: Renaming problem in Library assemblies where subcomponents are assembled multiple times. [RM-11553]
- Additional fix for: HASCO core retainer plates can not be selected. [RM-10792]
With Expert Moldbase Extension (EMX)as a module fully integrated into Creo Parametric, you can extend your software portfolio in order to standardize or automate design tasks in the field of injection molding tools to a large degree, thus allowing you to focus more on your core tasks.
By integrating standard part libraries from all common manufacturers and providing numerous intelligent templates, you can handle tasks in the areas of tool design and standard part installation quickly and flexibly. You will be supported by user-friendly dialogs and input assistance, which offer you the available options as appropriate. By offering extensive analysis tools, users outside the design department also benefit directly of the automatically derived results.
Furthermore, the software naturally supports you when transferring the design data to the production area, both in the
drawing derivation and in the digital and drawing-free transfer of the product and manufacturing information (PMI).
EMXB&W Softwareis the leading global provider of add-on applications for the 3D-CAD System Creo Parametric. Since many years B&W develops specially tailored software solutions to increase efficiency in the field of product design.
Industry solutions - from design to manufacturing - raise the bar while using Creo Parametric. As a strategic PTC partner B&W software products are fully integrated into the Creo Parametric system and are marketed through PTC channels.
The extension and customizing of your CAD environment by B&W software for intelligently automating routine tasks lead to cost saving and increased productivity. Furthermore you will increase most quality aspects of your products, cut down development cycles and create room for new ideas and perspectives.
Our partner PTCis a leading provider of CAD, PLM and IoT Software solutions. Creo Parametric is the flagship solution for 3D CAD modeling and provides outstanding design capabilities for parts and assemblies. The widely established modules of this software portfolio (including some B&W applications) are installed at more than 28.000 enterprises worldwide and contribute to design and service advantages.
Product:B&W Expert Moldbase Extension (EMX)
Version:12.0.2.8(9) for Creo 4.0-6.0
Supported Architectures:x64
Website Home Page :http://www.buw-soft.de]www.buw-soft.deLanguage:multilanguage
System Requirements:PC *
Size:751.1 mb
When running Creo Expert Moldbase Extension (EMX) 12.0.2.8(9) in PTC Creo 4.0-6.0, the minimum requirements are superseded by the minimum requirements listed for PTC Creo 4.0-6.0.
Download link:
Só visivel para registados e com resposta ao tópico.Only visible to registered and with a reply to the topic.Links are Interchangeable - No Password - Single Extraction
Cantinho Satkeys
