Autodesk Inventor HSM Ultimate 2019.3 Build 6.4.0.16913 (x64) Multilanguage
Autodesk Inventor HSM Ultimate 2019.3 Build 6.4.0.16913 (x64) Multilanguage
x64 | Language:Multilanguage | File Size: 427 MB
Autodesk Inventor HSM Pro powerful products company capable of Autodesk, a solution integrated software in the field of CAD / CAM in the field of mechanical parts in the form of a plug-in software Inventor also delivers all the capabilities of modeling and simulation program, designers, engineers and CNC programmers helps to put their projects directly and more quickly turn to car parts.
Using Autodesk Inventor HSM Pro all the advantages of toolpath (cut) models 2.5D, 3D, 3 + 2, and 5-axis to achieve better performance at your fingertips. HSM stands for High Speed Machining means high-speed machining. Currently this application because Nqssh performance in various industries including automotive, mold design, design of industrial parts and more widely used.
Features and Inventor HSM:
-All features of the software Inventor
-5-axis and multi-axis operation
-toolpath three-dimensional, curved and diagonal
-The possibility of finding the best cut routes
-Read, write and convert data from GIS, CAD to high range of formats
-Toolpath simulation with various methods
-Take advantage of the various types of CNC code specific functions and the ability to compare them with each other
-Advanced analytical tools such as size and distance calculations, physical details and estimated time of machining
-Support for 3-axis milling and positioning 2 + 3
-Improve productivity with support from old ways
WHATS NEW:
New in this version
-Add the "Select Same Diameter" function from the Drilling operation to the Bore, Thread, and Circular operations, including the recently added same diameter filtering. (#8074)
-Added the ability to drag and drop a tool from one operation onto another as it is done in HSMWorks. (#10732)
-When there is more than one body in the model, no automatic selection of all the bodies will be done when creating a new Setup. (#8140)
-For 2D Face operations, added the "Use even stepdowns option which was previously available for 2D Contour and 2D Pocket operations with multiple depths. This reduces the maximum stepdown amount so that each step can be equal. (#9786)
-Added the ability for a grooving tool to go a specified distance below the inner radius while facing the part in a groove turning operation. (#10069)
-In the Turning Profile operation, added the ability for the tool to machine some distance below inner radius in order to get rid of unmachined nubs. (#10073)
-For a better workflow in Turning operations, the Safe Z override parameters were moved after the Approach Retract parameters in the Linking tab. (#11120)
-For a new turning setup, set the default safe Z to the stock front. (#11420)
-For inside turning toolpaths, fixed the error message that popped up when the clearance radius was set to be smaller than the retract radius. (#11050)
-Fixed the order of the radii fields in the radii tab for turning operations to be more logical. It is now: outer radius, inner radius, retract, clearance. (#11051)
-Fixed an issue for Turning Profile operations in which leads were not generated at an angle with respect to the toolpath direction when "Use Fixed Lead Direction" was turned off. The problem occurred in both roughing and finishing passes. (#9944, #10284)
-Corrected the error message for Turning Profile, Turning Part, Turning Face and Turning Groove operations when the parameter "Distance to cut below inner radius" is set to more than 1 inch or 25 mm. (#11274)
-Fixed an issue where checking the parameter "Make sharp corners" was not creating sharp corners in a Profile Turning toolpath. (#10541)
-Removed the (unused) "Lead in/Lead out feedrates from the Turning Part operation since leads cannot be applied in that context. (#11230)
-Allow posting of Manual NC operations without toolpaths (#11649)
-Removed the (unused) "Entry Position" parameter from the NewRadial, NewSpiral, MorphedSpiral, Project, and Morph strategies to prevent confusion. (#10327)
-Fixed a problem with the retract at the shifted position when expanding the Fine Boring cycle for the post processor. (#11350)
-Fixed a problem in which some Inventor HSM addins could not be loaded successfully due to a file missing in the installer. (#11427)
-Allow two open bores to be machined in the same operation even if they overlap. (#11647)
-Remove the (non-working) "Rest from file" option from the rest machining dropdown menu in 3D operations. (#9814)
-Avoid creating an extra tool entry when creating a new tool. (#11944)
-Correct the display of the Feed & Speed title in operation dialogs. (#12278)
-Fixed excessive tool library load time with Harvey tools installed. (#11588)
-Fixed an issue with toolpath smoothing that could result in gouges. (#12239)
Changes to toolpath generation:
-For the Engrave toolpath, improved the ordering to reduce the distance which the tool jumps when moving between letters in engraved text. (#4968)
-Fixed a problem in the Pocket strategy that could cause an operation to freeze and not finish. (#10484)
-Fixed an issue with the Turning Profile and Turning Groove operations where the tool was not cutting to the inner radius if there was a hole with a diameter greater than the inner radius. (#9921, #10106)
-Fixed an issue where gouge checking for Turning Profile leads was incorrectly being done for the tool nose center instead of the tool contact point. (#11298)
HOMEPAGE
https://www.autodesk.com/DOWNLOAD LINKS :
https://rapidgator.net/file/81031d89cf7a942ddb9b3d06831c8e34/BaDshaH_Autodesk.Inventor.HSM.Ultimate.2019.3.rar.html
http://nitroflare.com/view/0F81C89129C61DF/BaDshaH_Autodesk.Inventor.HSM.Ultimate.2019.3.rar
https://turbobit.net/pant63llx3kr/BaDshaH_Autodesk.Inventor.HSM.Ultimate.2019.3.rar.html
https://ayefiles.com/4s03wc0yxjpj/BaDshaH_Autodesk.Inventor.HSM.Ultimate.2019.3.rar.html
Cantinho Satkeys
