Satkeys

SECÇÃO INFORMATICA => Software => Utilitários => Tópico iniciado por: mitsumi em 26 de Outubro de 2019, 05:55

Título: CAMWorks 2019 SP4.0 Build 2019.10.14 (x64)
Enviado por: mitsumi em 26 de Outubro de 2019, 05:55

(https://i106.fastpic.ru/big/2019/1026/83/b3af834d75b8d7bd027d918d24e3b383.jpg)

CAMWorks 2019 SP4.0 Build 2019.10.14 (x64) | 1.5 Gb
Languages: 中文 Simplified, 中文 Traditional, Français, Deutsch, Italiano, 日本語, Polski,
Português-Brazilian, Русский, Español, Türkçe, 한국어, Čeština

GeometricPLM is pleased to announce the availability of CAMWorks 2019 SP4.0, is a modern CAM programming solution that automates the creation of toolpaths inside SOLIDWORKS. Powering the SOLIDWORKS CAM, there is now a seamless associative path for all the SOLIDWORKS users machining and turning requirements.

        CW-94236    When a Center Drill operation is generated for an interactively inserted Hole feature, the Machining depth is calculated as the full feature depth though it's set as Constant Depthin TechDB.
CW-94177    When a stock is highlighted along the part and "Print" option is selected from File menu then,the stock details are not printedin the pdf document.
CW-94144    In CAMWorks Virtual Machine, G468/G468/G467 commands are not supported in Okuma OSP-P200M controller.
CW-93064    The CAMWorks data of the specific assemblies saved in CAMWorks 2018 version cannot be restored in CAMWorks 2019 SP3.
CW-92824    In CAMWorks Virtual Machine, the profile of the user defined chuck set for the main spindle is incorrectly displayed when the main spindle setup contains only a sub spindle operation. However, the profile of the user defined chuck set for the sub spindle is correctly displayed.
CW-92615    When the global rotary retract value is set to "Zero", then the Post Processor must interpretit as rapid plane retract.
CW-92547    The location of the mirrored toolpath for Multiaxis operation is incorrect when Plane is selected as the reference entity for mirror.
CW-92185    For the specific Mill part, when Simulate Toolpath command is executed then, error is displayed.
CW-92176    In Multi Axis Mill mode if the machine used is of the table-table combination then, the posted code for rotary axis rotation is incorrect.
CW-91902    In Milling if two post operations are positioned in a setup preceding any other operation then, the stock variables posted in the G code are incorrect.
CW-91646    The selected thread designation fora hole feature is not retained unless the same is reselected by opening the Tool data base dialog again.
CW-91517    In Milling, if the toolpaths are post processed by selecting "Output subroutines for patterned features" then, incorrect tool number is output with the toolpaths.
CW-91265    Disable the option of Polar/Cylindrical for Mill operations on a 4 Axis Mill machine as the option is not supported.
CW-90975    In TechDB, under default setup parameters the "Minimum Z" field for lower Z limits doesn't accept decimal values.
CW-90577    For the specific Assembly if the Override Arc Feedrate option is selected in the Contour Mill operation then, CAMWorks crashes when preview is done.
CW-90571    In assembly mode, when "Multi part toolpath output" is set to "By part" then, the post operation is always posted at the end of the G-Code irrespective of the position of the post operation in the CAMWorks operation tree.
CW-89962    For the specific Assembly file, when the "Generate Operation Plan" command is executed for an interactively inserted Circular Pocket feature, then the performance is very slow. The performance is as expected when the circular pocket is recognized using AFR.
CW-88849    In CAMWorks when user tries to print the part along with the displayed toolpath by using the option of "Ctrl+P" then, only the SOLIDWORKS part file is printed and the toolpath is not displayed in the printed document.
CW-88847    The thread designation set for a hole feature is not retained when the user closes the Feature parameters dialog box by clicking on OK button.
CW-88702    A crash of CAMWorks is observed when the specific assembly is opened in SOLIDWORKS by keeping CAMWorks as an active add in.
CW-88689    With the customized TechDB, no operations are generated upon doing Generate Operation Plan on features having valid strategies.
CW-88663    When a feature is copied across setup then, upon doing a rebuild, incorrect parameters are observed for the copied feature resulting in toolpaths with incorrect depths.
CW-88624    In CAMWorks Virtual Machine, an error stating "Null Feed Rate" is displayed after G81 command is executed.
CW-88612    Incorrect posted output is observed for Tap operations in Turning when posted along with preceding operations.
CW-88398    In CAMWorks Virtual Machine, the direction of arcs is reversed when machined with tool on Front Turret and posted using APT post processor.
CW-88237    For the specific Mill part, the toolpath generated for Area Clearance operation with Volumill pattern doesn't adhere to the defined avoid area.
CW-88217    For the specific assembly part, when the toolpath for Entry Drill operation is regenerated then CAMWorks crashes.
CW-88185    In CAMWorks Virtual Machine, gouge is observed after the "JUMPTO" command during simulation.
CW-88180    The values set for the Arc federate override are not adhered in the spring passes of Contour Mill toolpaths.
CW-88057    The toolpath for a Multiaxis mill operation with a dovetail tool having a nose radius is not generated.
CW-87986    The toolpath generated for a Rough Mill operation with pattern type set to Volumill doesn't adhere to the value set for Bottom Allowance.
CW-87902    Incorrect values for "TOOL SHANK DIAMETER" are observed in the posted output.
CW-87711    The Depth parameter field in the new perimeter feature dialog box doesn't save negative value. However, the toolpath gets updated tothe modified value.
CW-87685    The leadin move of the Contour Mill operation with chamfer machining options set to ON, gouges the adjacent segments in case if the included angle is more than 90 degrees
CW-87586    In the installation wizard of CAMWorks Feed Speed Library, the word "Please" is misspelt.
CW-87447    For the specific Mill Part, CAMWorks crash is observed when cam data is imported from another .prtcam file.
CW-87243    For the specific Mill Part, an error stating "Cannot continue with simulation" is observed while simulating the toolpaths.
CW-86648    For the specific part when user tries to define a CAMWorks co-ordinate system using a sketch then, SOLIDWORKS crashes.
CW-86500    For the specific assembly, the arc feedrate defined for a Contour Mill toolpath are not applied. Instead the XY federate is applied for circular moves in the toolpath.
CW-85034    In Rough Mill toolpaths with pattern type set to Volumill, the stepover recommended by Volumill Technology Expert is not applied and instead the earlier user defined stepover value is considered.
CW-83164    In assembly mode if a part instance is suppressed and then unsuppressed, the earlier defined offset value in a Mill part setup is reset to Zero.
CW-80860    The images displayed in the preview area for Turn Groove program point are incorrect.
CW-73189    For the specific Mill Part, when the toolpath simulation for Multiaxis mill operation is executed then CAMWorks crashes.
CWR-1656    For the specific part, when the 3-axis toolpath generation method is set to 'Advanced method' thenthe toolpath for Z Level operation along with the option of "Hit Flats" set to On, is incorrectly generated.
CWR-1654    For the specific part, when the 3-axis toolpath generation method is set to 'Advanced method' then the toolpath for Z Level operation is not generated.
CWR-1652    For the specific part, when the3-axis toolpath generation method is set to 'Advanced method' then the toolpath generated for area clearance operation with user defined holder is not generated.
CWR-1650    When 3-axis toolpath generation method is set to "Advanced method" then, the toolpath for Z level operation with cut type set to Helical doesn't adhere to the cut amount defined by the user. This happens when the mutli surface feature doesn't have any draft angle to it.
CWR-1611    For the specific part when 3-axis toolpath generation method is set to "Advanced method" then, the toolpath for Z Level operation with depth method set to 'Scallop' along with contain and avoid areas makes duplicate passes at the same level. This significantly increases the machining time.
CWR-1603    For the specific Mill part when 3-axis toolpath generation method is set to "Advanced method" then, the toolpath for the Area Clearance operation with rest machining method set to 'From WIP' gouges the part   

CAMWorks for SOLIDWORKS     was the first fully integrated computer-aided manufacturing (CAM) solution designed exclusively to operate in SOLIDWORKS and the first to offer knowledge-based, feature recognition, and associative machining capabilities within SOLIDWORKS.

CAMWorks uses the same SOLIDWORKS geometry to generate toolpaths to ensure the part you machine is the same part you've modeled. Toolpath simulation allows users to compare "as designed" parts to "as machined" parts. The part model-to-toolpath associativity in CAMWorks increases machining productivity and lowers manufacturing costs by eliminating time-consuming CAM system rework due to design updates.

CAMWorks eliminates the drudgery of CNC programming with Intelligent Machining through automation. Pioneered by Geometric Technologies, this suite of tools automates the generation of toolpaths based on a knowledge-based database. It eliminates hours of complex programming through Automatic Feature Recognition (AFR) that automatically defines prismatic machinable features, while the TechDBTM (Technology Database) defines machining operations to automatically generate accurate toolpaths at the click of a button.

CAMWorks machining modules include: 2½ Axis Mill, 3 Axis Mill, Turning, Mill-Turn with 5 Axis Simultaneous Machining Support, 4/5 Axis Simultaneous Machining, and Wire EDM.

CAMWorks  2019 delivers  many  enhancements  and  improvements,  most  created  in  direct response                                                                                                                                                                                                          to customer requests. This release focuses onhelping you program the parts in faster and easier way.It also introduces an Additive  Manufacturing module that can used togenerate  Build  Tickets  (3D  data)  required  to  print 3D  print  part  models.

GeometricPLM by HCL Technologies   a specialist in the domain of engineering solutions, services and technologies. Its portfolio of Global Engineering services, Product Lifecycle Management (PLM) solutions, Embedded System solutions, and Digital Technology solutions enables companies to formulate, implement, and execute global engineering and manufacturing strategies aimed at achieving greater efficiencies in the product realization lifecycle.

On April 1st 2016, Geometric got into an agreement with HCL Technologies to transfer of its business to HCL Tech by way of demerger, except for its 58% share in the joint venture with Dassault Systèmes (3DS) (3DPLM Software Solutions Limited (3DPLM)). The transition has become effective on March 2nd 2017, after seeking all statutory approvals.

Product: CAMWorks
Version: 2019 SP4.0 build 2019/1014 (14-October-2019)
Supported Architectures: x64
Website Home Page :

Só visivel para registados e com resposta ao tópico.

Only visible to registered and with a reply to the topic.

Language: multilanguage
System Requirements: PC *
Supported Operating Systems: *
Software Prerequisites: *
Size:   1.5 Gb

        Before installing CAMWorks 2019, ensure that the following system requirements are fulfilled:

Supported Microsoft Windows Operating Systems
- 64-bit version of Windows 10
- 64-bit version of Windows 8.1
- 64-bit version of Windows 7 (SP1 or higher)
** Home editions of the above Operating Systems are not supported.
Supported CAD applications
CAMWorks runs as an Add-in within SOLIDWORKS or CAMWorks Solids. The following versions of CAD applications support CAMWorks 2019 x64:
- 64-bit version of SOLIDWORKS 2019
- 64-bit version of CAMWorks Solids 2019
- 64-bit version of SOLIDWORKS 2018
- 64-bit version of CAMWorks Solids 2018
Hardware Requirements
RAM:   8 GB or more recommended
Video Card:  Certified cards and drivers
Processor:   Intel or AMD processors with SSE2 support. 64-bit operating system required.
USB port:    User may choose to have CAMWorks license on a USB dongle (key). CAMWorks Hardware dongle (key)plugs into the USB port.
Network:    Microsoft's Windows Networking and Active Directory network environments.
Install Media:    Broadband Internet Connection   

Download link:

Só visivel para registados e com resposta ao tópico.

Only visible to registered and with a reply to the topic.

Links are Interchangeable - No Password - Single Extraction